For stationary objects or flat surfaces

This linear movement applicator has a guided piston and a label gripping pad with vacuum generator and sensor to monitor actual picking. The system is self-adapting. Ideal for stationary objects or flat surfaces.

Models for different strokes:

SHORT: useful stroke of 300 mm

LONG: useful stroke of 600 mm

EXTRA-LONG: useful stroke up to 1250 mm. This model is of the telescopic type to minimise machine clearance

Applications

Applies labels to the side or top of stationary boxes in adaptive manner with respect to the distance of the box.

Applies labels on the side face of stationary objects.

Label application on the front or on the two adjacent sides

This rotary movement applicator has a guided piston and a label gripping pad with a vacuum generator and sensor to monitors actual picking. The system is self-adapting. Ideal for application on stationary or slow moving objects and on flat surface.

Models with different arm length:

SHORT ROTOR: with 530 mm arm

LONG ROTOR : with 800 mm arm

Applications

Applies a label on the side or two labels – one on the front and one on the side – on stationary objects (with the box stopping in two positions) or slow moving objects (with stops).

For labels on three sides

This three-side applicator consists of a linear piston with a max. stroke of 500 mm and a second piston with a max. stroke of 150 mm fitted on the rotating head. The rotating head may assume three stable positions at -90°, 0°, +90° for application on each of the three sides of the pallet (front, side, back). Specific for A5 size labels.

Applications

Applies three labels – one on the advancing front face, one on the side and one on the back – in stationary position with the pallet stopping in three positions.

For very high-frequency static air jet applications

This model is provided with a high-frequency fixed air jet (not moved by a piston) capable of accurately “spitting” the label to a distance of 80 mm from its surface and thus until approximately 50 mm of distance from the clearance of the labelling machine. Suited for high-frequency application on moving objects (also at high speed). Use of the application finishing device is recommended in case of surfaces with poor adhesion. The device consists of a soft rubber roller which presses the label to apply it (after labelling).

• Applicator pad for Printess 4: suitable for label sizes up to H 120 mm x B 120 mm.
• Application frequency: with label size H 80 mm x B 40 mm frequencies of up to 250 cycles/minute are achieved.

For contact-less applications on moving objects

This linear movement applicator has a guided piston and label gripping pad with vacuum generator and sensor to monitor actual picking. Application is performed by a powerful air jet without contact with the object. Suited for application on stationary or moving objects also with irregular or not perfectly flat surface.

Models for different strokes:

SHORT: useful stroke of 300 mm.

LONG: useful stroke of 600 mm.

Applications

Applies a label on the side or top of moving boxes if the size of the boxes is very variable using an air jet with moved pad and photocell to locate the correct spitting distance of the label automatically.

For applications on strapping

This is a linear movement applicator.

Model for two different applications:

– Model A: For application on strapping after it has been wound on the pallet.

– Model B: For application on taut strapping before it is uncoiled and wound on the pallet.

Applications

Applies one or more labels to the strapping and turns the adhesive edge. The strapping is wound around the pallet and pulled taut at the end. Ideal for mineral water bottle pallets.

For labels on large diameter round objects

This linear movement applicator has a guided piston and a label gripping pad with vacuum generator and sensor to monitor actual picking. This “enveloping” pad can printed on round objects even of very different diameter. Application is carried out on stationary and well-positioned objects. Specific for label size min. H 50 mm x B 40 mm / max. H 180 mm x B 210 mm.

Models for different strokes:

SHORT: useful stroke of 300 mm.

LONG:useful stroke of 600 mm.

Applications

This model applies labels to bulging surfaces of a stationary object using a wrap-around pad.

Light floor stand (for positions not subject to shocks). Adjustable in height and configurable in many different ways. With accessories, such as air pressure regulator, beacon with indicator lights, electronic unit bracket etc.

Robust floor stand (for heavy-duty applications). Adjustable in height and configurable in many different ways. With accessories, such as air pressure regulator, beacon with indicator lights, electronic unit bracket etc.

Integral stainless steel box for protecting the electronic unit. Recommended for use in wet and dusty environments. Data can be set on the touchscreen.

Aluminium profile box for protecting the operator and the pallet printing unit.

Instrument for holding the temperature at about 20°C in environments colder than 5°C.

After printing, one or more codes are read and checked by a laser scanner. In case of negative results, the printing operation is repeated and the new label is placed on top of the previous one. The checking device may be fitted on the printer (to check immediately after printing) or for reading the previously applied label. Barcode and two-dimensional code checking devices are available.